Suitable for general visibility and identification applications, including:

• Private driveways and entrances
• Gates, posts, letterboxes and bins
• Fixed objects on private property
• Warehouse and workshop equipment identification
• Plant, machinery and site equipment where no certified marking is specified
• Indoor and outdoor visibility marking

Suitable surfaces may include clean, dry and smooth metal, painted metal, rigid plastic, glass, sealed wood and other stable, non-porous surfaces.

Adhesion depends on the surface condition, preparation, texture and application temperature. Test a small area before full installation.

For bollards and barriers, use only as supplementary visibility marking on privately owned items where no formal specification applies. It should not replace prescribed reflectors, approved traffic-management products or required safety components.

Product: Flashback® Red Prismatic Reflective Tape

Product code: FB-PZ

Colour: Red

Material: Acrylic prismatic reflective material

Backing: Self-adhesive

Widths: 25mm, 50mm, 100mm, 150mm, 200mm

Lengths: 1–45 metres

Application: Indoor and outdoor visibility marking where no certified material is specified

Surface type: Suitable clean, dry, smooth and rigid surfaces

1. Check that the surface is suitable and test a small area.
2. Remove dust, dirt, oil, wax and loose material.
3. Allow the surface to dry completely.
4. Measure and cut the required amount of tape using sharp scissors or a suitable knife.
5. Peel back a small section of the release liner.
6. Position the tape and apply it gradually using firm, even pressure.
7. Check that the edges are firmly attached before exposing the tape to handling or outdoor conditions.

Adhesion depends on the surface, preparation, texture and application conditions. Do not apply over rust, loose paint, oil, moisture or heavily textured surfaces.

This product is intended for visibility marking where no specific approval or certification is required.

It is not supplied as ECE104/R104-approved vehicle conspicuity material, certified traffic-sign sheeting or reflective PPE.

For regulated HGV and trailer conspicuity marking, view our ECE104-compliant vehicle tape.

Public-highway, roadworks, traffic-management and prescribed sign applications may require particular materials, colours, layouts or approvals. Check the applicable requirements before ordering for a regulated application.

Is this reflective tape suitable for outdoor use?

Yes. It is intended for indoor and outdoor visibility marking. Performance and service life vary according to the surface, preparation, installation, handling and exposure conditions.

Can I use it on bollards or barriers?

It may be suitable for supplementary visibility on clean, smooth, privately owned bollards or barriers where no formal standard applies. Do not assume it meets requirements for public-highway, roadworks, traffic-management or safety-critical equipment.

Is this tape ECE104 compliant?

No. Where regulated HGV or trailer conspicuity markings are required, select approved ECE104/R104 reflective tape.

Can it be used on clothing or fabric?

No. This self-adhesive tape is intended for suitable rigid surfaces and is not reflective PPE material.

Can the tape be cut to size?

Yes. It can be cut using sharp scissors or a suitable knife. Take care when using cutting tools.

Can the tape be removed?

Yes, although adhesive residue may remain and some surfaces or coatings could be affected. Gentle heat may help soften the adhesive, but always test first.