Prepare the Area: Start by cleaning the reflective tape area with soap and water to remove any dirt or debris. Dry the surface thoroughly.
Apply Heat: Use a hairdryer or a heat gun to warm up the reflective tape. Hold the heat source about 4-6 inches away from the tape and move it back and forth. The heat helps soften the adhesive, making it easier to peel off.
Peel Off the Tape: Once the tape is sufficiently heated, use your fingernail or a plastic scraper to gently lift one corner of the tape. Gradually peel the tape off in the direction away from the surface. Be patient and avoid pulling too hard, as this may damage the surface.
Remove Residue: After peeling off the tape, there may be adhesive residue left on the surface. To remove it, dampen a soft cloth or rag with rubbing alcohol, acetone, or a commercial adhesive remover. Gently rub the residue in a circular motion until it comes off.
Clean the Surface: Wipe the entire area with a clean, damp cloth to remove any remaining adhesive remover or residue. Dry the surface thoroughly.
Inspect for Residue: Examine the surface closely to ensure that all tape and adhesive residue are completely removed. If any residue remains, repeat the process with the heat source and adhesive remover.
Final Clean-Up: Once the surface is clean, consider using a mild detergent or soap to clean the area again and remove any remaining cleaning solution. Dry the surface thoroughly.
Test in a Small Area: Before applying heat or adhesive remover to the entire surface, test it in a small, inconspicuous area to ensure it won't damage the material.
Patience is Key: Take your time when peeling off the tape and removing adhesive. Rushing the process may result in damage to the surface or leave behind residue.
Protect Your Hands: If using a commercial adhesive remover, wear gloves to protect your hands from the chemicals.
By following these steps carefully, you should be able to remove reflective tape without causing damage to the underlying surface.
]]>
Reflective tape is an effective safety solution used to make objects and surfaces visible at night or in low light. It is made of a highly reflective material that returns light to its source, making it visible from a distance. This product is an ideal choice for those looking for reliable, long-lasting visibility.
Reflective tape is an effective safety solution used to make objects and surfaces visible at night or in low light. It is made of a highly reflective material that returns light to its source, making it visible from a distance. This product is an ideal choice for those looking for reliable, long-lasting visibility.
Uses | Recommended Tape |
Bicycles | 3M Black Tape |
Posts & Driveways | Golden Yellow Prismatic Tape |
Trucks & Vans | ECE104 Tape |
Marine | Solas Tape |
Bollards | Bollard Tape |
Bins | Hi Vis Bin Numbers |
Make cycling safer with Reflective Tape. Highly-visible and durabile, the tape will make you stand out in day or night. Its glass beads reflect light for a greater visibility range, helping to ensure your safety.
If you're planning to cycle on the road, an increase in visibility is essential for road safety.
• Very Reflective - The tape is often used on trucks, signs and public transport.
• Subtle - The tape won't totally change the look of your bike.
• Durable - 8 Year service life.
• Not Hi Vis - The tape isn't ideal for improving day visibility as it's not a bright colour.
• Hi-Viz - Great for day and night time visibility.
• Doesn't bend around corners as easily as the black 3M tape.
It's best to keep to red reflectors for the rear of your bicycle.
We don't recommend that you stick reflective tape on bicycle helmets, because the adhesive could damage the structural integrity of the helmet.
Reflective tape is often used on fence posts and driveways to help mark boundaries and lower the chances of accidents and damage.
For use on fence posts, make sure that the surface is smooth so that the adhesive can sticky properly.
You may need to sand paper the wood smooth, or nail the tape in if the wood is rough.
When reversing your car some objects are hard to spot in your rear-view mirror. It is vital to highlight hazards to prevent collisions.
Reflective Tape for boats needs to be able to withstand severe weather condition and help boats to be seen at night. It's important that rescue helicopters can find boats at night so that the passengers can be found fast.
Check out our selection of Bollard Tape here
Riders sometimes use the tape to help ensure greater visibility when the sun is low or the conditions are dark.
Reflective tape is often used to mark the house number on bins.